After the wifi wavlink com setup, are you experiencing the Wavlink range extender IP not working issue? If you are nodding your head in yes, then worry not. Many users all over the globe face this same problem. Are you wondering how to resolve the Wavlink range extender IP not working issue? Well, walk through the troubleshooting tips discussed in this post and learn how to do so.

Fixed: WiFi Extender IP Not Working

The approach to fix the Wavlink range extender not working issue is straightforward. Go through the hacks given below and fix the issue.

  1. Perform a Power Cycle

The very first way to solve the Wavlink range extender IP not working issue is to reboot your device. The reason is by restarting your range extender you can easily fix some major or minor technical issues. If you don’t know how to power cycle the extender then follow the steps given below to execute the whole process:

  • First of all, you need to disconnect the extender from the router.
  • Thereafter, power off the extender and remove it from the power socket.
  • Then, wait for a couple of seconds.
  • Now, put the range extender back into the wall outlet and turn on the switch.
  1. Check the Internet Connection

Occasionally, many people experience a Wavlink range extender IP not working problem due to a weak or wonky internet connection. To get rid of this issue, make sure that your wireless range extender receives a high-speed internet connection. On the off chance, if everything is perfect from your side then contact your Internet Service Provider (ISP).

  1. Verify the Default IP

Make sure that you have typed the correct IP address in the location field. Just in case, if the default IP address still not working then use a web address. The default web URL is ap setup.

  1. Avoid WiFi Interference

Another way to fix the Wavlink extender IP not working issue is by placing the wireless devices within the range. But, away from the objects like microwaves, treadmills, baby monitors, and much more.

  1. Examine the Power Cycle

For the Wavlink extender to function well, the power source must be reliable. You may encounter the Wavlink extender default IP not working issue due to any power fluctuation. As a result, think about checking the state of the power outlet where your Wavlink extender is plugged in. Try moving your extender to another wall socket if you see any damage or a short circuit in the wall outlet. Additionally, make sure the power cable you are using is undamaged.

  1. Reset Your Extender

Last but not least, if none of the above-discussed methods help you in solving the Wavlink WiFi range extender IP not working issue, then it’s high time to reset the range extender to its factory default settings. Always, keep in mind that after the reset process, all the customized settings will be erased. If you are not sure how to reset the range extender to its factory mode, then follow the steps given below:

  • Initially, look for the reset button.
  • As soon as you find it, press or hold the button.
  • For this, you can use a toothpick or paper clip.
  • Thereafter, wait for a couple of seconds and release the button.

Now your Wavlink range extender reset successfully.

In the End

That’s it! We end our guide on how to resolve the Wavlink range extender IP address not working issue. We hope that with the help of this post, you can easily fix the issue in a hassle-free way. If you liked reading this article, then do not hesitate to give a word of appreciation in the comment section.