How to Connect Arlo Camera to Netgear EX2700 extender

 How to Connect Arlo Camera to Netgear EX2700 extender

You should get a Netgear EX2700 extender setup and connect your Arlo camera to it if you want the following advantages: You can decide on where and how to place it without worrying about any connectivity issues with the WIFI. As well, Netgear EX2700 extender act as a seamless link between devices and connect to the router via WiFi.

Make sure that the Ethernet port on the WiFi extender is operational prior to proceeding with the process of connecting an Arlo camera to the WiFi extender. If you don’t have it, you may not be able to accomplish either of the devices’ desired results or outputs.

Instructions to connect Arlo camera to the extender’s WiFi network

Ethernet Cable for Arlo base station

There is a series of steps after which you should follow the below process:

Next, carefully connect the provided WiFi range extender to the WiFi network. Initiate the task by following the instructions in the user manual.

Once you have determined where you want to place the Netgear EX2700 extender setup and the Arlo camera, determine where the Arlo base station will be

Power on the Arlo Camera and wait until it establishes a connection with the WIFI extender. To verify the functioning of the connected devices, open the Arlo app and test it out.

Only Arlo Q cameras can be connected to the WiFi extender through the above procedure. The Arlo cameras also require a base station and a WiFi extender.

It’s also important to keep in mind that when connecting an Arlo base station to a WiFi extender, the same rule applies.

Now, hook up the WiFi extender to your WiFi network and activate it. Set up the machine as instructed in the installation instructions included in the package.

Ensure the Arlo camera is connected to the base station via an Ethernet cable, and check to see if the base station has an Ethernet port.

While using an Ethernet cable, establish the connection between the Arlo base station and the WiFi range extender.

Now, press the Power button on the base station for two minutes and wait for the Power LED and Internet LED on the front panel to blink green. A first pass should include checking for connections in the app and attempting to use the application for the first time.

Frequently Asked Questions Regarding Arlo Cameras and Wi-Fi Extender

Q. Is there a WiFi extender for the Arlo Pro 2 camera?

You cannot connect your Arlo Pro 2 camera directly to a WiFi extender at your home or office due to the requirement of a base station. For further reference, please use the steps and instructions mentioned above.
Q.The Arlo camera’s maximum range is from the base station.on?

When you position the Arlo wire-free cameras, you have to take care of the distance thing. When using a SmartHub or base station, the cameras can be placed a maximum of 300 feet (90 metres) away from the Hub or Base Station.

If there is an obstruction (walls, ceilings, or treetops) between the base station and the camera, then the range will be lowered.

Q. Do I need to connect my Arlo camera to the WiFi router as well?

If your WiFi router is already connected to an extender, there is no need to create a separate connection between the router and the Arlo camera.

In order to get an Arlo Q Wi-Fi extender to function as a bridge between the camera and router, it will have to be plugged into the same outlet as the router. Even if you connect the base station to the WiFi extender instead of the WiFi router, the same rule applies.

Can I connect the Arlo camera and WiFi extender over an Ethernet cable without the need for a traditional cable?

Nope, you’ll need an Ethernet cable to connect an Arlo camera to the WiFi extender. This is because the Arlo cameras use a unique, dedicated connection mechanism that is not supported by any other technology during the initial setup process.

All you need to do is configure the Arlo camera to connect to the WiFi extender.

Setting up an Arlo Q device to use a Wi-Fi extender is a simple and easy process. Simply buy an Ethernet cable of high quality, and follow the instructions above.

If you intend to use another Arlo camera model, make sure to connect it to the base station in advance. If the devices aren’t working, check to see if you can reconnect.